> wilson signal booster

Wilson Signal Booster Antennae: Buy interior glass mount cell phone antenna booster (Wilson antenna accessory isn't OEM manufacturer wireless phone accessory). Wilson dual band antennas are tri-mode and ideal for cell phones to enable them to work in automobiles even while roaming in other Carrier?s networks across USA and Canada. Wilson antennae are very low profile and compact (1.5" x 5") yet provide a remarkable boost in reception. This ground plane antenna has a built-in grounding system so this booster signal kit does not require ground plane and therefore Wilson signal booster can also be used inside home or office to boost reception inside buildings. Wilson wireless signal booster kit includes Wilson cellphone glass mount patch antenna, 3M adhesive to mount Wilson signal booster on an inside glass surface (car window, dual pane glass window in an office building, auto windshield, etc.), and a 14 ft. cellular RG58/U coax cable with attached FME female connector. Wilson antenna adapter to the RF port of the phone may be needed to connect this Wilson cell phone antenna booster to your phone. Wilson cellphone antenna booster may provide a strong signal (Antenna Gain of 2.2-3.2 dBi and System Gain of 10 dB which is upto 10 times the signal of cellular phone used inside an auto without an inside antenna) if these Wilson external antennas are attached directly to phones using their antenna port connectors (not included with this purchase). Wilson antenna kit is very easy to install and it boosts reception substantially (Antenna Gain of 0.33-0.48 dBi and System Gain of 3 dB which is upto 3 times the signal of a mobile phone used inside an auto without an internal antenna) as well as reduces dropped calls indoors as well as in autos and trucks. Boost signal reception with Wilson signal boosters! Pricewise, if not the cheapest, Wilson signal booster is comparatively cheaper than other cellphone antenna boosters available. Purchase Wilson signal boosters for less at this discounted Wilson wireless phone accessory store! Wilson booster accssory is an AFTERMARKET Wilson antenna accesory made for cell-phones. Wilson boosters are brand NEW Wilson antenna accesories made for cellphones that operate in the range of 806-894 MHz / 1850-1990 MHz which includes practically all cell phones in the world. Wilson phone cell-phone signal booster acessory is NOT OEM mobile phone cellphone signal booster ccessory. After market accessores such as Wilson cell-phone signal boosters are an economical ALTERNATIVE to expensive OEM manufacturer ccessories like cell-phone signal boosters. Looking for other Wilson parts and acessories? For more Wilson products and accssories, search using the keyword search box to view another cell phone accessorie or buy another discount Wilson wireless phone accessory for mobile phones.

Wilson Signal Boost: Boost signal exponentially with antenna signal booster and wireless RF power amplifier system that is a mobile amp cellular reception boost kit and RF extender which provides up to 3 watts of RF power amplifier to amplify the reception with ten times more antenna booster power than the actual wireless phone handset! : Buy one BoostSignal for home and one for your car! IF you need one for ANOTHER vehicle in the family or as a GIFT for someone. Wilson 811210 RF amplifier kit significantly improves voice signal quality for clearer conversations on cell phones as well as PC booster data signal quality for faster mobile Internet access over virtually any wireless Carrier's network for better implementations of 3G technologies already in place with the help of this Internet booster for wireless networks. Wilson W-811210 cell phone signal boost system features power amplifier's power control logic feature that ensures maximum output power is within cellular standards. Wilson W 811210 signal booster is wireless range extender that is FCC and IC type accepted although US and other foreign patents are pending. Wilson 811210 works with all Cellular/PCS Service Providers except iDEN (Nextel/Southern LINC/Mike) and 1700MHz AWS (T-Mobile US 3G). Wilson signal-boost wireless booster is range extender for cell phones and is fully compatible with wireless phones on any network of CDMA, TDMA, GSM, and PCS worldwide including Cingular Wireless, Sprint PCS, T-Mobile USA, Verizon Wireless, Alltel, Amp'd Mobile, Suncom Wireless, Cellular One, Cellular One Western, Cellular One Dobson, Cricket Wireless, Disney Mobile, Helio Wireless, Metro PCS, Qwest, Tracfone, U.S. Cellular, Virgin Mobile USA, and all other carriers - EXCEPT Boost Mobile, Southern Linc, and Nextel iDEN networks. Wilson Signalboost wireless extender phone amplifier offers portability to carry and use in vehicles or use in a home or office environment. Wilson signal boosting cell phone antenna extender is easy to install and relatively inexpensive. Boost cell phone signal easily with Wilson signal booster cell phone extender (Wilson Electronics 811210)! Reception signal system to amp db power connects easily with universal power amp connector using enclosed Velcro patch (no plug-in adapter needed!) and best of all, cell phone antenna booster system is easy to use! In addition, this antenna booster system is much cheaper than other comparable RF power amplifying systems. Boost cell phone reception for less with this Wilson cell phone amplifier! Wilson SignalBoost Cellular Signal Amplifier system amp kit purchase includes cell phone signal booster base unit as well as cigarette lighter DC power supply plug, universal cell phone connector with a Velcro patch with attached extension cable (see visual image of signal booster kit contents). Wilson Dual Banded SignalBoost PCS and Cellular Amplifier by Wilson Electronics is manufactured and assembled in U.S.A. Boost mobile phone signal for less with this remarkable cellphone signal boost system. In our opinion, these perform better than other amplifier systems such as Signal Reach, Cyfre, Digital Antenna, Richardson Electronics, and Inteligain that we may also carry elsewhere at this website. Summary of Benefits: ? Cell-phone signal boost system works with all PCS phones, cellular phones, and laptop data cards (except ones on Nextel iDEN networks). ? Cellular phone signal boost system connects to ALL phones and data cards, no plug-in adapter needed! ? Cell phone reception enhancer's universal connector uses removable adhesive backed Velcro® patch. ? Mobile phone signal boost system has up to 10 times more power than your cellphone or laptop data card! ? Wireless phone signal boost system significantly improves voice and data signal quality. ? Mobile signal boost system increases data communication rates needed for 3G technologies. ? Wireless signal boost system receives and transmits better than your wirele...

C-Booster Cradle Amplifier for Blackberry Curve 8300 Series (Wilson 805206 Kit Includes Mini Magnet Mount Antenna Part # 301126). Wilson CBooster is designed specifically to amplify signals for BlackBerry Curve Smartphones. Wilson Electronics C-Booster improves both voice as well as data signals on the road. The cradle features a built-in antenna and battery charger. Wilson C-Booster is designed for simple set-up and is portable from vehicle to vehicle and to a house or office. Wilson 805206 C-Booster is an all-in-one kit. The cradle includes both the external antenna and amplifier unit and therefore, no external antenna is necessary. The ibooster kit installs in seconds - just plug into any in-car power supply and then place BlackBerry Curve cell phone into its perfectly fitting cradle. It dramatically improves the Black Berry Curve's voice and data performance in weak signal areas. Kit Contents: C-Booster all-in-one cradle combo: amplifier and charger Outside vehicle magnet-mount antenna Cigarette lighter power adapter Installation guide Specifications: Part Number: 805206 Frequency: 824-894MHz, 1850-1990MHz Gain (up/down): 40dB / 42dB Isolation >90dB Max Output Power: 1000 mw Noise Figure (down): 3.5 dB Nominal Power Requirements: 12V Connectors: SMA Female Dimensions: 2 x 4.75 x 1(inches) Weight: 3 oz

Wilson Wireless Antenna Booster: Wilson external antenna booster drive time kit is a complete wireless phone antenna reception booster kit for cellular phones. Wilson wireless signal booster purchase includes a powerful triband external magnet mount antenna with 10 ft. RG174 extension cable. Antenna mast of this Wilson wireless antenna booster is ideal for magnet attracting metallic surfaces. 12.25" Wilson phone booster can be installed in vehicles, offices, homes, cabins, or wherever wireless phones reception is weak. Whip antenna of this Wilson wireless antenna booster is made of stainless steel but needs a ground plane so its rare earth magnet mast must be mounted on a metal surface such as on top of vehicles or on top of a metal file cabinet at an office or home for better reception indoors. Wilson wireless antenna booster is a Tri-Band Wilson wireless antenna booster. TriBand Wilson antenna booster is already tuned to boost cell phone signal to increase reception, reduce dropped calls, and provide better sound quality even while roaming in other Carrier networks in United States and Canada. Antenna port cell-phone adapter may be required with this Wilson wireless antenna booster or a velcro pad which attaches to the back of the cellphone may suffice (neither included with purchase). Wilson antenna booster is easy to install and use. Wilson cell phone antenna booster enhances voice clarity, boosts reception, and reduces call drops while providing Antenna Gain of 0.33-0.48 dBi and System Gain of 2-5 dB, which is more than 3 times the signal of a mobile phone used inside a vehicle without external antenna. If this magnet mount external antenna is used in combination with Wilson Amplifier, it may provide an even more strong signal with Antenna Gain of 2.2-3.2 dBi and System Gain of 10-15 dB which is more than 10 times the signal of the phone when used inside a vehicle without an external antenna! Pricewise, if not the cheapest, this Wilson magnet mount antenna booster is comparatively cheaper than other cell phone antenna boosters in the market. Wilson wireless antenna boosters for less at this discount Wilson accessory store! Wilson booster accssory is an AFTERMARKET Wilson antenna accesory made for all wireless phones operating in 806-866 MHz / 896-939 MHz / 1850-1990 MHz frequency range which includes practically all wireless phones in the world. Wilson boosters are brand NEW Wilson antenna accesories made for mobile phones. Wilson cell-phone antenna booster acessory is NOT OEM mobile phone manufacturer cell-phone antenna booster ccessory. After market Wilson accessores such as Wilson cell phone cell-phone antenna booster are an economical ALTERNATIVE to expensive OEM phone manufacturer ccessories like cell-phone antenna boosters. Looking for other Wilson parts and acessories? For more Wilson products and accssories, use the keyword search box to view another Wilson cell phone accessorie or buy another discounted Wilson accessory for cell phones.

Wilson Antenna Booster: Buy Wilson external antenna booster drivetime kit that includes TriBand cellphone glass mount external antenna cell phone booster with 12" antenna whip (stainless steel), one open coil & one enclosed coil, 14 feet RG-58 cable and attached FME connector. Wilson antenna adapter to the Radio Frequency port of the cell phone may be needed (not included) to connect this Wilson cellphone antenna booster to your phone. Wilson cell phone booster's long RG58 cable provides plenty of length to easily install this Wilson mobile reception booster kit in any vehicle to provide reception gain while driving. Wilson antenna mast of this Wilson antenna booster has 3M adhesive designed for glass surfaces. Wilson antenna booster has stainless steel whip antenna with built-in ground plane so this cell phone booster can be used in homes and offices as well, for better in-building reception! Cell phone antenna adaptor (not included with this purchase) may be needed to connect this Wilson cell phone antenna booster to your phone. 10-15 dB System Gain (more than 10 times the signal of a phone used inside a vehicle without an outside antenna) may be gained if this Wilson external antenna is attached directly to RF antenna port on phones using phone RF antenna port connectors (not included with this sale). This Wilson antenna kit is very easy to install and use and it provides a substantial improvement of phone reception in cars, vans, trucks, SUV's, or minivans (System Gain of 2-15 dB which is more than 3 times the signal of a cell phone used inside a vehicle without external antenna). Pricewise, if not the cheapest, this discount Wilson glass mount antenna booster is comparatively cheaper than other cell phone boosters available. Wilson booster accssory is Wilson phone antenna accesory made for mobile phones. Wilson boosters are brand NEW Wilson antenna accesories made for cell phones operating in the frequency ranges 806-866 MHz / 896-939 MHz / 1850-1990 MHz which includes practically all cell phones in the world. Wilson cell-phone antenna booster acessory is NOT OEM phone manufacturer mobile phone cell-phone antenna booster ccessory. After market accessores such as Wilson cellphone antenna booster are an economical ALTERNATIVE to expensive OEM manufacturers ccessories like Wilson cellphone antenna boosters. Purchase 15" discounted Wilson external on-glass mount tri band antenna cell phone signal booster that is tuned to boost signal for all cellular phones. This Wilson cellphone booster is ideal for all protocol mobiles to enable it to work even while roaming in other Carrier?s networks within USA and Canada. Wilson Cellphone boosters for less!

Reduce dropped calls and increase range! TP-300: Power Booster: 3 Watt Motorola iDEN (Nextel) Long Range PORTABLE Cell Phone Antenna Signal Booster/ Cellular Antenna Signal Amplifier for Motorola iDEN phones by Nextel. The Signal Reach SA-300 Portable Cellular Amplifier provides amplification of transmit and receive signals for improved cellular communications. Designed for use with Motorola iDEN mode cellular phones distributed by Nextel, the signal amplifier reduces problems with signal fades and dropped calls while improving voice quality, service range and access. The signal amplifier enhances performance of cradle-mounted cellular telephones, resulting in wider coverage, less signal fading in buildings in urban environments, and increased coverage when used in rural areas. signal amplifiers is designed to enhance coverage in areas where signal strength is affected by terrain, buildings or other interference. This power booster can also provide coverage in areas beyond the normal reach of cellular telephones, along the periphery of a network. This cellular amplifier is designed to operate on Motorola iDEN mode signals from virtually all cellular service providers in North America using the 806 to 870 MHz iDEN cellular band. This signal amplifier is designed to enhance coverage in areas where signal strength is affected by terrain, building or other interference. This wireless booster is compatible with normal cellular network operations, and boost signal strength along the periphery of the network. This cellular amplifier is designed to work with a variety of cradles and hands-free systems. This cellular signal amplifier is a network- compatible device that ensures proper power levels in the transmit (uplink) path, enhancing the cellular telephone user?s experience without compromising cellular network inter- operability requirements. Furthermore, the signal amplification provided by the amplifier receive circuitry is appropriately optimized for network operation. This Motorola Nextel iDEN phone Cellular Amplifier can be used with any cellular telephone offered by Nextel, provided the user has a suitable cradle with an RF output or an RF connecting cable. This FCC-approved signal booster greatly improves sound quality, while reducing the amount of dropped calls. The bi-directional signal booster provides 15dB gain to the incoming signal and 3 watts of output power. The booster provides wider coverage, lessening signal fade in fringe areas. Installs between the phone's antenna adapter and an external antenna with TNC connectors. Use with 3dB antenna. Features: ? Power control logic to ensure maximum output power is within cellular standards ? Self-adjusting circuitry allows it to work with any cellular phone/ cradle combination ? Network- compatible operation to ensure transmit power tracks connected phone output ? 3 Watt output (iDEN band) with typical antenna Total Power 300 kit includes: SignalReach TP-300 Dual Band Cellular Amplifier Rugged floridan vinyl case with handle 12 volt power adapter with fused circuit protection RF adapter connectors (Mini-UHF and TNC) RF cable extension Case &amp amplifier manufactured in North America One year warranty on all components Required Accessories (Not Included): External Dual Band Antenna External antenna adapter or hands free kit with external antenna output ? Wilson 12" Magnet Mount Antenna ? Wilson 15" Glass Mount Antenna ? Wilson Interior Glass Mount Antenna ? Wilson Patch Antenna ? AC Power Supply (for use with included Cigarette Lighter DC Power Supply)

Reduce dropped calls and increase range! SA-300: Power Booster: 3 Watts Motorola iDEN (Nextel) Long Range Cell Phone Antenna Signal Booster/ Cellular Antenna Signal Amplifier for Motorola iDEN phones by Nextel. The Signal Reach SA-300 Portable Cellular Amplifier provides amplification of transmit and receive signals for improved cellular communications. Designed for use with Motorola iDEN mode cellular phones distributed by Nextel, the signal amplifier reduces problems with signal fades and dropped calls while improving voice quality, service range and access. The signal amplifier enhances performance of cradle-mounted cellular telephones, resulting in wider coverage, less signal fading in buildings in urban environments, and increased coverage when used in rural areas. signal amplifiers is designed to enhance coverage in areas where signal strength is affected by terrain, buildings or other interference. This power booster can also provide coverage in areas beyond the normal reach of cellular telephones, along the periphery of a network. This cellular amplifier is designed to operate on Motorola iDEN mode signals from virtually all cellular service providers in North America using the 806 to 870 MHz iDEN cellular band. This signal amplifier is designed to enhance coverage in areas where signal strength is affected by terrain, building or other interference. This wireless booster is compatible with normal cellular network operations, and boost signal strength along the periphery of the network. This cellular amplifier is designed to work with a variety of cradles and hands-free systems. This cellular signal amplifier is a network- compatible device that ensures proper power levels in the transmit (uplink) path, enhancing the cellular telephone user?s experience without compromising cellular network inter- operability requirements. Furthermore, the signal amplification provided by the amplifier receive circuitry is appropriately optimized for network operation. This Motorola Nextel iDEN phone Cellular Amplifier can be used with any cellular telephone offered by Nextel, provided the user has a suitable cradle with an RF output or an RF connecting cable. This FCC-approved signal booster greatly improves sound quality, while reducing the amount of dropped calls. The bi-directional signal booster provides 15dB gain to the incoming signal and 3 watts of output power. The booster provides wider coverage, lessening signal fade in fringe areas. Installs between the phone's antenna adapter and an external antenna with TNC connectors. Use with 3dB antenna. Features: ? Power control logic to ensure maximum output power is within cellular standards ? Self-adjusting circuitry allows it to work with any cellular phone/ cradle combination ? Network- compatible operation to ensure transmit power tracks connected phone output ? 3 Watt output (iDEN band) with typical antenna SA300 kit includes: SignalReach SA-300 Dual Band Cellular Amplifier One year warranty on all components Required Accessories (Not Included): External Dual Band Antenna External antenna adapter or hands free kit with external antenna output ? Wilson 12" Magnet Mount Antenna ? Wilson 15" Glass Mount Antenna ? Wilson Interior Glass Mount Antenna ? Wilson Patch Antenna ? AC Power Supply (for use with included Cigarette Lighter DC Power Supply)

If Wilson iDen RF Amp Booster 806-869 MHz made by OR for manufacturer WILSON - Part # 804002 is what you are looking for, look no further because we carry it at the best TOTAL price, everyday! If Wilson iDen RF Amp Booster 806-869 MHz made by OR for manufacturer WILSON - Part # 804002 SIGNALBOOST amplifier iDen Band 806-824 MHz/ 851-866 MHz iDen network Amplifier/ Booster Wilson model 804002.Wilson's Bi-directional 3 watt Amplifier: improves RF coverage in areas with low signal strength. The RF signal is received by the optional outside antenna from the cell site. The RF signal is then AMPLIFIED and transmitted into your iDen phone through the included Slim low profile inside antenna (301127) or an optional RF adapter/ cradle. When the iDen phone transmits the signal is sent to the amplifier through the optional RF adapter/ cradle or Slim low profile inside antenna included (301127) then AMPLIFIED and sent to the cell site through

Wilson 301126 magnet mount external antenna with 10 feet cable is DUAL-BAND mini mag-mount booster antenna. Mini Magnet Mount Cellular Antenna - SMA Male (301126). Purchase Wilson 301126 external antenna booster drive time kit that is a complete wireless phone antenna reception booster kit for cellular phones (Scroll down for purchasing option of phone-specific or universal antenna connector that is required but not included with this purchase). Wilson 301126 wireless signal booster purchase includes a powerful dualband external magnetic mount antenna with 10 ft. RG174 extension cable for marked improvement in reception while traveling in any vehicle. Antenna mast of this Wilson 301126 wireless antenna booster is ideal for magnet attracting metallic surfaces. Wilson 301126 phone booster can be installed in vehicles, offices, homes, cabins, or wherever wireless phone reception is weak. Whip antenna of this Wilson 301126 wireless antenna booster is made of stainless steel but needs a 5? diameter ground plane so its rare earth magnet mast must be mounted on a metal surface such as on top of vehicles or on top of a metal file cabinet at an office or home for better reception indoors. Dual Band Mini Magnet Mount Antenna 800-1900 MHZ with 10 inch coax cable and SMA male connector. Wilson 301126 wireless antenna booster is a dual band Wilson 301126 wireless antenna booster. DualBand Wilson 301126 antenna booster is tuned to boost signal at frequencies of 806-894 MHz / 1850-1990 MHz to increase reception, reduce dropped calls, and provide better sound quality even while roaming in other Carrier networks in United States, Mexico, and Canada. Wilson 301126 cell phone antenna booster enhances voice clarity, boosts reception, and reduces call drops while providing Antenna Gain of 5.12 dBi 806-894MHz / 6.12 dBi 1850-1990 MHz which is many times multiplied by the signal of a typical cell phone used inside a vehicle without external antenna. If this magnet mount external antenna is used in combination with a direct connect external antenna cable (scroll down for its separate purchase option), it will provide optimum signal reception. Buy Wilson 301126 wireless antenna boosters for less at this Wilson accessory store! Click "Up" button to view another Wilson accessory. List of Features: ? Easy to install ? Removable - transfers from one vehicle to another ? Rare earth magnet ? Metal ground plane required (Minimum 5? Diameter) Specifications: Wilson Part Number 301126 Frequency Range: 806-894 MHz/ 1850-1990 MHz Impedance: 50 ohms Antenna Gain: 2.12 dBi 806-894MHz / 3.12 dBi 1850-1990 MHz Radiation: Omni Directional Polarization: Vertical Wavelengths: 1/4 Wavelength 806-894 MHz / 9/16 Wavelength 1850-1990 MHz Ground Plane: Metal ground plane required Connector: SMA Male Material: Whip - Plastic-Coated Steel Wire Coaxial Cable: RG174 - 10' Height: 4.175 inches / 10.60 cm Mount: Rare earth magnet

Reduce dropped calls and increase range! 3 Watt Dual-Band (PCS & Cellular) Long Range Cell Phone Antenna Signal Booster/ Cellular Antenna Signal Amplifier for AMPS, PCS, TDMA, GSM, CDMA Phones. The Signal Reach SA200 Dual-Band Cellular Amplifier provides amplification of transmit and receive signals for improved cellular communications. Designed for use with cellular tri-mode, dual band telephones, the signal amplifier reduces problems with signal fades and dropped calls while improving voice quality, service range and access. The signal amplifier enhances performance of cradle-mounted cellular telephones, resulting in wider coverage, less signal fading in buildings in urban environments, and increased coverage when used in rural areas. The amplifier is designed to operate on TDMA, CDMA and GSM mode signals from virtually all cellular service providers in North America using the 824 to 894 MHz and 1850 to 1990 MHz (PCS) cellular bands. Signal amplifiers are designed to enhance coverage in areas where signal strength is affected by terrain, building or other interference. They are compatible with normal cellular network operations, and boost signal strength along the periphery of the network. The amplifier is designed to work with a variety of cradles and hands-free systems. This cellular signal amplifier is a network- compatible device that ensures proper power levels in the transmit (uplink) path, enhancing the cellular telephone user?s experience without compromising cellular network inter- operability requirements. Further, the signal amplification provided by the amplifier receive circuitry is appropriately optimized for network operation. This Dual Band Cellular Amplifier can be used with any cellular telephone, provided the user has a suitable cradle with an RF output or an RF connecting cable. This FCC-approved signal booster greatly improves sound quality, while reducing the amount of dropped calls. The bi-directional signal booster provides 15dB gain to the incoming signal and 3 watts of output power. The booster provides wider coverage, lessening signal fade in fringe areas. Installs between the phone's antenna adapter and an external antenna with TNC connectors. Use with 3dB antenna. Features: ? Power control logic to ensure maximum output power is within cellular standards ? Self-adjusting circuitry allows it to work with any cellular phone/ cradle combination ? Network- compatible operation to ensure transmit power tracks connected phone output ? 3 Watt output (800 MHz band) with typical antenna ? 2 Watt output (1900 MHz band) with typical dual band antenna. SA200 kit includes: SignalReach SA-200 Dual Band Cellular Amplifier One year warranty on all components Required Accessories (Not Included): External Dual Band Antenna External antenna adapter or hands free kit with external antenna output ? 4" Mini Magnet Mount Antenna ? Wilson 12" Magnet Mount Antenna ? Antenna Specialist 14" Magnet Mount Antenna ? Wilson 15" Glass Mount Antenna ? Wilson Interior Glass Mount Antenna ? Wilson Patch Antenna ? Andrew Car Window Antenna ? Andrew Mirror Mount Antenna ? AC Power Supply (for use with included Cigarette Lighter DC Power Supply)

Reduce dropped calls and increase range! TP-200: 3 Watts Dual-Band (PCS & Cellular) Long Range PORTABLE Cell Phone Antenna Signal Booster/ Cellular Antenna Signal Amplifier for AMPS, PCS, TDMA, GSM, CDMA phones. The Signal Reach TP-200 Portable Dual-Band PCS & Cellular Amplifier provides amplification of transmit and receive signals for improved cellular communications. Designed for use with cellular tri-mode, dual band telephones, the signal amplifier reduces problems with signal fades and dropped calls while improving voice quality, service range and access. The signal amplifier enhances performance of cradle-mounted cellular telephones, resulting in wider coverage, less signal fading in buildings in urban environments, and increased coverage when used in rural areas. The amplifier is designed to operate on TDMA, CDMA and GSM mode signals from virtually all cellular service providers in North America using the 824 to 894 MHz and 1850 to 1990 MHz (PCS) cellular bands. Signal amplifiers are designed to enhance coverage in areas where signal strength is affected by terrain, building or other interference. They are compatible with normal cellular network operations, and boost signal strength along the periphery of the network. The amplifier is designed to work with a variety of cradles and hands-free systems. This cellular signal amplifier is a network- compatible device that ensures proper power levels in the transmit (uplink) path, enhancing the cellular telephone user?s experience without compromising cellular network inter- operability requirements. Further, the signal amplification provided by the amplifier receive circuitry is appropriately optimized for network operation. This Dual Band Cellular Amplifier can be used with any cellular telephone, provided the user has a suitable cradle with an RF output or an RF connecting cable. This FCC-approved signal booster greatly improves sound quality, while reducing the amount of dropped calls. The bi-directional signal booster provides 15dB gain to the incoming signal and 3 watts of output power. The booster provides wider coverage, lessening signal fade in fringe areas. Installs between the phone's antenna adapter and an external antenna with TNC connectors. Use with 3dB antenna. Features: ? Power control logic to ensure maximum output power is within cellular standards ? Self-adjusting circuitry allows it to work with any cellular phone/ cradle combination ? Network- compatible operation to ensure transmit power tracks connected phone output ? 3 Watt output (800 MHz band) with typical antenna ? 2 Watt output (1900 MHz band) with typical dual band antenna. Total Power 200 kit includes: SignalReach TP-200 Dual Band Cellular Amplifier Rugged floridan vinyl case with handle 12 volt power adapter with fused circuit protection RF adapter connectors (Mini-UHF and TNC) RF cable extension Case &amp amplifier manufactured in North America One year warranty on all components Required Accessories (Not Included): External Dual Band Antenna External antenna adapter or hands free kit with external antenna output ? 4" Mini Magnet Mount Antenna ? Wilson 12" Magnet Mount Antenna ? Antenna Specialist 14" Magnet Mount Antenna ? Wilson 15" Glass Mount Antenna ? Wilson Interior Glass Mount Antenna ? Wilson Patch Antenna ? Andrew Car Window Antenna ? Andrew Mirror Mount Antenna ? AC Power Supply (for use with included Cigarette Lighter DC Power Supply)