> ram mounts upc

Chief Manufacturing UPC10 Chief's customized UPC Series Projector Mount offers the best-looking and most functional installation possible for projectors that must be mounted upright in the ceiling. Each UPC projector mount includes a bracket that is custom designed to fit the contour of your projector, giving you the lowest profile support possible. The UPC customized brackets also save you valuable projector maintenance time by providing easy access to the lamp and filter. Custom design of most UPC Projector Brackets provides needed access for: -Quick lamp changes -Easy filter cleaning -Good projector ventilation -Overall Dimensions: 1-3/4"H x 6-1/4"W x 5-1/2"D QUICK PROJECTOR DISCONNECT/RECONN ECT Quickly and easily remove the projector from the ceiling by loosening the thumb nuts on the bracket portion of the mount; lift up and off removing projector and hanger bracket. This feature makes lamp changes, lens and filter cleaning or projector servicing quicker and easier without losing registration. ROLL, PITCH AND YAW ADJUSTMENTS Fast and precise image registration is achieved through the easy roll, pitch and yaw adjustments built into the RPA mounts. +/-4 Degrees Roll Adjustment can be made on each side of the mount using a standard philips screwdriver. Loosen screw, adjust mount and tighten screw to hold adjustment. +/-25 Degrees Pitch Adjustment is accomplished by adjusting the pitch adjustment screws on either side of the mount. 180 Degree Yaw Adjustment can be made by turning mount on threaded column. THREE CEILING MOUNTING METHODS Three different mounting methods provide a quick, secure ceiling installation for your application. -FLUSH MOUNT to suitable ceilings using the four corner slots in top of RPA mount. (Hardware not included.) -1/4" THREADED ROD using the four corner slots in top of RPA mount. (Threaded rod not included.) -NPT 1 1/2" THREADED PIPE COLUMN using threaded coupler at top of RPA mount. (Threaded pipe column not included.) WALL MOUNT OPTION In addition to the three ceiling mounting methods, you may attach an RPA mount to the wall using the WMA-300 Wall Mount Accessory Arm. Click Here for a full list of supported projectors and the style mount you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico UPC Projector Mount Installation Instructions About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and ma Model: UPC-10