> fluke 23iii multimeter

This 100,000-count multimeter features two 5-digit multifunction vacuum fluorescent displays and is particularly useful in applications requiring two different measurements of the same signal such as power supply testing. Other features include a standard RS-232 interface, digital readout of dB (21 reference impedances), and a compare (hi/lo/pass) function for fast in-tolerance testing. Relative mode shows difference between readings; Min/Max mode reads highest and lowest values measured. Meter features 16 different measurement capabilities including true-RMS voltage, current measurement including AC and DC, and frequency measurement to 1MHz. The DC current accuracy is 0.005% for 4-20mA current loop service. CAT I rated for 1000V, CAT II rated for 600V. (Fluke FLUKE-45) CSA certified. UL listed. AC Voltage (True- RMS), Range: 0-750V Resolution: 1 uV-0.01V Accuracy: +-0.2% +10 DC Voltage, Range: 0-1000V Resolution: 1 uV-0.01V Accuracy: +-0.025% + 2 AC Ampere (True-RMS, AC Coupled), Range: 15 uA-10 mA Resolution: 0.1 uA-10 mA Accuracy: +-0.5% + 10 DC Ampere, Range: 0 mA-10A Resolution: 0.1 uA-10 mA Accuracy: +-0.05% + 2 dB Readout (600 [OMEGA] Ref.), Range: -34 +- 60 dB Resolution: 0.01-0.1 dB Accuracy: +- 0.08 dBm Resistance, Range: 0 ohm-100 megohm Resolution: 0.001ohm-1 megohm Accuracy: +-0.05% + 2 Frequency, Range: 5 Hz to 1 MHz Resolution: 0.01 Hz to 1 kHz Accuracy: +-0.05% + 1 Dimensions: 21.6W x 28.6L x 9.3H cm (81/2 x 111/4 x 35/8") Shipping Weight: 4 kg (8.8 lbs.) Ordering Information: Manufacturer's one-year limited warranty. Meter can be calibrated without opening the case.

the fluke 77-iv digital multimeter has the features needed to repair most electrical and electronic problems. this meter is simple to use and has significant improvements over fluke s original 70 series with more measurement functions conformance to the latest safety standards and a much larger display that s easier to view. it measures: wide 1000 v measurement range average responding ac measurements 0.3 percent accuracy 10 amps continuous (20a for 30 seconds) frequency and capacitance resistance and continuity

a complete automotive diagnostic package with everything you need in an automotive multimeter. the fluke 88v is made in the u.s.a. and carries the industry leading lifetime warranty. the fluke 88v operates very similar to the classic fluke 88 but with more problem solving power safety convenience and impact protection. the new fluke 88v automotive multimeter with the measurement functions troubleshooting features and accuracy to solve virtually any problem on conventional and hybrid vehicles. it is also environmentally protected from shop dust and the occasional water splash.

Series V Deluxe Automotive Multimeter KitA complete automotive diagnostic package. Improved measurement functions, trouble-shooting features and accuracy to solve more problems on conventional and hybrid vehicles. Built-in thermometer lets you carry one less tool (temperature probe included). Resistance, continuity and diode test. RPM measurements with inductive pickup (included). Millisecond pulse width measurements for fuel injectors. Frequency to 200 kHz and % duty cycle. Measure up to 1000 V ac and dc. Measure up to 10 A, 20 A for up to 30 seconds. 4 digits for precise measurements. Features: Magnetic hanger to attach meter to the vehicle and free your hands for other tasks. Min/Max-Average recording with Min/Max Alert to capture variations automatically. Relative mode to remove test lead interference from low ohms measurements. Large display digits and two-level bright white backlight for increased visibility. Analog bargraph for fast changing or unstable signals. Access door for fast battery changes without opening up the case. Limited lifetime warrantee, UL and CSA approved. Made in USA. 88V/A Combo Kit includes: 88V Automotive Multimeter. 1.5m long heat resistant silicone test leads. Removable test probes to pierce corroded terminals. Alligator clips. Magnetic hanger to position and hold meter to steel surfaces. Temperature probe Inductive RPM pick-up probe. Two back probe pins. Insulation piercing clip (red). Durable case.

Fluke 233 True-rms Wireless DMM with Detachable Remote Display Wireless remote display is like having an extra hand. Now there's no need to hold meter to read measurements. Just detach display and find a comfortable position to view test data up to 33 feet away from dirty or noisy environments; see readings when test point is in another room or hidden behind equipment; run tests a safe distance from moving machinery and shock and arc flash hazards. Features: Radio transmitter automatically turns off when display is connected to meter True-rms ac voltage and current for accurate measurements on non-linear signals Built-in thermometer allows temperature readings Use as conventional multimeter when display is connected Auto off saves battery life Low power wireless technology does not interfere with measurement accuracy Captures min/max/average reads automatically CAT III 1000V CAT IV 600 V Specs: 6000 count display; Measures Voltage up to 1000 VAC and VDC; Measure Current up to 10A; 10,000 µF Capacitance range; 50 kHz Frequency range; Temperature: -40°C to 400°C, display selectable in °C or °F; Measures Resistance, Continuity and includes Diode Test; Captures variations automatically with Min/Max and Average recording; Battery life approximately 400 hours.Includes:Met er; Holster; Test Leads; Alligator clips, AA batteries, Manual and Thermocouple Probe. Three-Year Warranty. (USA)

The Meterman XP series of multimeters combine features and accuracy in a small device Each XP multimeter has built-in non-contact voltage (NCV) detection, Magne-Grip holster and CAT III safety ratings15 XP 2000-count autoranging with logic test for electronic and field service applications Weight: 2 Pounds

fluke 177 ESFP Digital Multimeters TRMS Multimeter with Back Light Fluke 177 ESFP Specifications: RoHS: Not Applicable Accuracy: +/ 0.09 % Capacitance Range: 9999 uF Frequency: 2 Hz to 50 KHz Resistance Range: 50 M Ohms Product Category: Digital Multimeters Display Count: 6000 Equipment Type: Digital Multimeters Multimeter Digital; 1000 VDC (Max.) Voltage Range Installed 9V battery Test leads Users manual Fluke 333A Features: True RMS voltage and current measurements 0.09% basic accuracy 6000 count resolution Digital display with analog bargraph and backlight Manual and automatic ranging Display Hold and Auto Hold Frequency and capacitance measurements Resistance continuity and diode measurements Min max average recording Smoothing mode allows filtering of rapidly changing inputs Easy battery exchange without opening the case Closed case calibration through front panel Ergon

Versatile compact true-rms meter for maintenance and field service. The Fluke 177 has a wide 1000V measurement range Features include large easy to read display, backlight for work in dimly lit arears, MIN/MAX recording to capture signal fluctuations.

built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument large digital display 6000 counts 3-3/4-digits measure up to 1000v ac and dc auto and manual ranging for maximum flexibility analog bar graph for fast changing or unstable signals

fluke 87 5 Fluke 87 5 True RMS Digital Multimeter Fluke 87 5 Specifications: Measurement Category: Cat IV 600V/ Cat III 1000V Fluke 87 5 Includes: TL75 test leads AC72 alligator clips Removable holster with built in probe and test lead storage 9V battery (installed) Getting started manual CD with detailed manual 80BK temperature probe Fluke 87 5 Features: Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument Optional magnetic hanger for easy set up and viewing while freeing your hands for other tasks Large digit display with bright two level backlight Ideal for the following applications: General electrical electronic troubleshooting and repair work The Fluke 87 5 digital multimeter has improved measurement functions trouble shooting features resolution an

Built in thermometer and temperature probe for HVAC applications LoZ: helps prevent false readings due to ghost voltage Large white LED backlight Resistance, continuity, frequency and capacitance Min/Max/Average with elapsed time to record signal fluctuations Compatible with optional magentic hanger(ToolPak(tm) ) Includes: TL75 test leads, 80BK intergrated temperature probe, holster, user's manual, and 9 V battery CAT III 600 V safety rated

AutoVolt feature for automatic AC/DC voltage selection Large display & white LED backlight allow efficient work in poorly lit areas True RMS for accurate measurements on non-linear loads Min/Max/Average to record signal fluctuations Compatible with optional magnetic hanger (ToolPak) for hands-free operation Current measurement 20A (30 sec. Momentary, 10A continuous) TL75 Hard Pont Test Lead Set; Resistance, Continuity & Diode Testing CAT III 600 volt safety rated LoZ: low input impedance prevents false readings due to ghost voltage

Fluke Digital Multimeter with Thermometer has improved measurement functions, trouble-shooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro- mechanical equipment.

the new fluke 87v has improved measurement functions trouble-shooting features resolution and accuracy to solve more problems on motor drives in plant automation power distribution and electro- mechanical equipment.

features and benefits: the fluke 88 series v dmm has a large digital backlit display for easy viewing in poorly lit environments the built in thermometer eliminates the need to carry a separate meter for temperature measurements its peak min max feature captures intermittent events as short as 250 microseconds the dmm is protected from bumps and bounces by an integrated removable holster and a magnetic hanger holds the meter for viewing while freeing the hands for other tasks includes accessories: tl224 1.5 m long heat resistant silicone test leads tp220 removable test probes for probing corroded terminals ac285 wide jaw alligator clips two automotive back probe pins insulation piercing probe tpak magnetic hanger to position and hold meter to steel surfaces rpm80 inductive rpm pick-up probe 80bk temperature probe user s manual and getting started guide product manuals on cd c800 durable carrying case

All-round performers The model numbers Fluke 73 and 77 are an important part of Fluke’s reputation. In many years of service they have become the preferred models for a large number of professionals. The Fluke 73 and 77 offer exactly the right fit for a wide range of measurements. They are truly all-round performers. The 73 IV is perfectly suited for many electronic applications and has the "classic" 70 series design with removable holster. The 77 IV has all the features and functions for a wide range of industrial applications packaged in an ergonomic case with integrated holster. Both models come with the unique lifetime warranty. * 0.3% basic accuracy * 3200 count resolution * Digital display with analog bargraph * Manual and automatic ranging * Automatic Touch Hold * Resistance, continuity and diode measurements * Ergonomic case with integrated protective holster (Fluke 77 III) * "Classic" design with removable holster (Fluke 73 III) * Sleep mode preserves battery life * Lifetime warranty

The Fluke 88 is a complete automotive diagnostic package. It offers virtually everything you need in an automotive multimeter: Volts, ohms, amps, continuity and diode test Milliseconds pulse width measurements RPM measurements with inductive pickup Min/Max/Avg recording Frequency and duty cycle measurements Lo Ohms function Change AlertTM SmoothingTM Bright White Backlit display Rugged, Hard-Shell Carrying Case Deluxe Test Leads with interchangeable Test Probes and Wide Jaw Alligator Clips Sleep mode 10 Megohm input impedance Lifetime Warranty Cat II 300 V

Item #: FLU1791ACII. Features & BenefitsTrue-RMS Cat III at 1000V meter Cat IV at 600VChecks AC/DC volt, amps, milliamps, temperature, capacitance, resistance, continuity and frequencyMin/Max/ Average to record signal fluctuationsBackl ight for dimly lit areasLarge, easy to read display screenThe 179 true-rms Multimeter has the features needed to find the most electrical and HVAC problems.It's simple to use with significant improvements over the original. This particular 179 has more measurement functions, conformance to the latest safety standards and a much larger display that's easier to view. Also it can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes. This combo kit includes the following: silicone test leads, industrial test probes, heavy-duty alligator clips, integrated temperature probe, and a non-contact voltage tester, all included in a soft side case. Customers also search for: Tools and Storage\Automotiv e\Auto Electrical and Diagnostic Tools\Multimeters Discount Multimeter Combo Kit, Buy Multimeter Combo Kit, Wholesale Multimeter Combo Kit, 095969362801, ToolWeb, Multimeters

Fluke 88 Series V Automotive Multimeter has improved measurement functions, trouble-shooting features and accuracy to solve more problems on conventional and hybrid vehicles.

Also known as: FLK-113, FLU113; VCHEK LoZ low impedance measurement function to simultaneously test for voltage and continuity True-rms for accurate ac measurements on non-linear loads A large backlit display allows for easy visibility in low-lit areas Record signal fluctuations using the Min/Max function Diode test for testing general-purpose germanium, silicon, and power diodes Integral holster with probe holders for easy storage Auto and Manual ranging for added user functionality Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety The optional TPAK magnetic hanger allows the user hands-free flexibility

Also known as: FLK-287, FLU287; Features and BenefitsLarge 50,000 1/4 VGA display with white backlightLogging features designed for unattended monitoringOn board help screens for measurement functionsSaved measurements allow you to name and recall measurements made in the field Multi-lingual interfaceTrue- rms logging multimeter with TrendCapture quickly documents design performance and graphically displays what happened. Unique logging and graphing capabilities mean you no longer need to download to a PC to detect trends. Multiple logging sessions possible without download. 0.025% basic DC accuracy. 100 kHz AC bandwidth. Real time clock for automatic time stamping of saved readings. Tru-rms AC voltage and current for accurate measurements on complex signals or non linear loads. AC bandwidth specified to 100 kHz. Measure up to 10 A (20 A for 30 seconds)50 mF capacitance range. Features temperature function. Premium test leads and alligator clips included. Limited lifetime warranty.

Trendsetter Our most advanced DMM for the demanding electronics professionals. Advanced. Precise. Accurate. Logging DMM with Trend Capture. The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture quickly documents design performance and graphically displays what happened. Its’ unique logging and graphing capabilities mean you no longer need to download logged readings to a PC to detect a trend. The Fluke 287 packs more accuracy and convenience into a handheld multimeter than ever before, putting more problem solving power in your hands. It is the ultimate handheld tool for demanding applications that require high-precision. Be sure to also check out the Fluke 289 True-rm Industrial Logging Multimeter with TrendCapture designed for industrial professionals. Key Features Include: * NEW – Large 50,000 count, ¼ VGA display with white backlight. Multiple sets of measurement information can simultaneously be displayed at the same time. * NEW - Logging function with TrendCapture is an essential tool for documenting the performance of your designs, processes or systems, or unattended monitoring while you work on other projects. It plots measurements as a single line to help detect signal anomalies over time, storing up to 10,000 readings. Using on-board TrendCapture, you can graphically view logged readings without a PC. (Software and interface cable optional). * NEW – Log multiple sessions or log data continuously for over 200 hours. * NEW - i-info button. On board help screens for measurement functions. Unsure about a function? Go to that function and Press the “i” button. * NEW – Now, name your saved measurements and also recall measurements made in the field * Real Time Clock – for automatic time stamping of saved readings * NEW - Field upgradeable and expandable meter lets you stay current as new capabilities are added * NEW - Multi-lingual interface * Min/Max/Average with Time Stamp to record signal fluctuations * Soft keys, scroll buttons and easy navigation control access to secondary functions. * 0.025% Basic DC accuracy * 100 kHz ac bandwidth * True-rms ac voltage and current for accurate measurements on complex signals or non-linear loads. * Measure up to 10A (20 A for 30 seconds; 10A continuous) * 100 mF capacitance range * Temperature function * Relative mode to remove test lead resistance from low ohms or capacitance measurements * Peak capture to record transients as fast as 250 s * Premium test leads and alligator clips included * Optional FlukeView forms enables you to document, store and analyze individual readings or a series of measurements, then convert them into professional- looking documents * Optional magnetic hanger allows you to hang the meter for easy viewing while freeing your hands to focus on the job. * Limited lifetime warranty * CAT III 1000 V / CAT IV 600 V safety rated